← Back to Archives
VOLUME 6, ISSUE 5, MAY 2018
Wavelet Transform Based Fault Detection Method - A Review
Snehal A.Nemade, Dr.V.G.Neve, Prof. Saurabh H.Thakre
Medical Monitoring System Using IoT
Rajeev Bhosle, Sumeet Kale, Akshay Nair, Prof. K.A. Adoni
Vertical Axis Flapped Type Wind Turbine
Vivek Mahore, Akshay Rajput, Aniket Sonawane, Alfiya Mokashi
Efficient Route Optimization Using Distance Matrices for Generation of Latin Square
Sumit A. Bhagat, Prashant M. Kakade
Medical Image Segmentation Based on the SVM & K-NN based Edge Stop Function
A.Joel Dickson, R.J Alice Nineta
Sensorless model of PMSM based on DTC method with Adaptive System
G.T.Chandra Sekhar, P. Sowmya
Design, Manufacturing & Testing of Captive Power Plant Using Liquid Coolant Jet
Mr. Rohit C. Chavan, Mr. Tushar B. Ransing, Ms. Tejaswini V. Khot, Prof. Pooja P. Kulkarni
Application of Unified Power Flow Controller and Superconducting Magnetic Energy Storage Device for AGC Problem
G.T.Chandra Sekhar, S. Halini, L. Narasinga Rao
Electricity Billing Through PLM
Swati Shirsat, Ganesh Khandve, Vaibhav Karche, Bhagyashree Raut
A study on Lane Departure Warning System and Object Detection on Roads for Forward Collision Avoidance
Faiz Habeeb. K, N Kunan, N Tuturaja
Design Study and Performance Evaluation of 198kWP Grid Connected SPV System at Academic Block I, Integral University, Lucknow
Eram Kayanat, T.Usmani, Zohaib Hasan Khan
Automation of Injector Test Stand Machine
Mr. Dnyaneshwar V. Kshirsagar, Mr. Akshay V. Mandhare, Mr. Amar A. Patil, Prof. P.P. Kulkarni
Power System Fault Analysis Using Signal Processing Technique – A Review
Vaibhav S.Yendole, Prof.Kiran A.Dongre
Abstract
Wavelet Transform Based Fault Detection Method - A Review
Snehal A.Nemade, Dr.V.G.Neve, Prof. Saurabh H.Thakre
DOI: 10.17148/IJIREEICE.2018.651
Abstract: Electrical power system consist various component. From this component Transmission lines are designed to transfer electrical energy from source locations to distribution networks. Therefore these are vital component of electrical power system. Most of time transmission lines are exposed to various faults in overhead transmission line system. Hence various protective scheme and devices such as protective relay and fault recorder systems, based on fundamental power frequency signals, are installed to separate the faulty line and provide the fault position. However, the error is high especially in transmission lines, so to provide a good quality of electricity as well as to prevent accidents, a study of protective scheme is very important. This paper provides a brief review of various faults and wavelet based fault detection methods used for their detection.
Keywords: Wavelet transform, fault detection, power system, ANN.
Keywords: Wavelet transform, fault detection, power system, ANN.
Abstract
Medical Monitoring System Using IoT
Rajeev Bhosle, Sumeet Kale, Akshay Nair, Prof. K.A. Adoni
DOI: 10.17148/IJIREEICE.2018.653
Abstract: The healthcare sector in the world is facing a number of challenges like increasing population, lack of exercise, change in lifestyle and many more. It affects the health of people of any age group. The people get affected with various health problems such as blood pressure and cardiac problems etc. To avoid these health issues, medical monitoring system can play a vital role by regular monitoring of blood pressure, heart rate and haemoglobin at various interval of time. One can send these data to hospitals/doctors for further analysis. Doctor can send appropriate prescription, necessary actions to be taken with the help of IoT platform. This system can help a normal human being/patient to collect data at their residential premises itself without wasting any time in travelling to the hospitals or clinics. This system can be useful for physically disable, senior citizens. This system is user friendly, portable and saves time of particular patient. The Wi-Fi module is used to communicate with the doctor available at remote hospital, where he views patient’s health and prescribe any treatment if necessary.
Keywords: Microcontroller, Heart rate, Body temperature, Remote Monitoring, IoT.
Keywords: Microcontroller, Heart rate, Body temperature, Remote Monitoring, IoT.
Abstract
Vertical Axis Flapped Type Wind Turbine
Vivek Mahore, Akshay Rajput, Aniket Sonawane, Alfiya Mokashi
DOI: 10.17148/IJIREEICE.2018.654
Abstract: The Flap Turbine (FT) is a novel sort of Vertical Hub Turbine (VAWT) where the cutting edges are made of versatile folds. These versatile folds, when joined together, go about as a sail or cutting edge for the VAWT. This kind of turbine is otherwise called a check valve turbine as a result of the check valve like the conduct of the moving folds. At the point when the sail is moving the downwind way, the folds are shut and won't permit air (water if the turbine works in the water) to go through the sail. In any case, when the sail is moving the upwind way the folds will be in the vacant position and permit air (or water) go through the sail. Basically expressed, a wind turbine works the inverse of a fan. Rather than utilizing power to make wind, similar to a fan, wind turbines utilize twist to make power. The wind turns the sharp edges, which turn a pole, which associates with a generator and makes power.
Keywords: Flap turbines, Wind energy, Battery, Microcontroller.
Keywords: Flap turbines, Wind energy, Battery, Microcontroller.
Abstract
Efficient Route Optimization Using Distance Matrices for Generation of Latin Square
Sumit A. Bhagat, Prashant M. Kakade
DOI: 10.17148/IJIREEICE.2018.655
Abstract: Distance matrices are used for measuring the distance between two matrices. Using Distance matrices we can generate a Latin square which is also called as Sudoku code. Latin squares have a variety of different practical applications, for example they can be used to code messages, design tournaments or generate magic squares. The theory of Latin squares is very important tool in design theory. Like much of design theory, Latin squares have various applications in statistics, finite geometries and experimental design, to name a few. In this paper, attempt is made proposed an efficient parallel algorithm for Latin square design which have desirable properties for parallel array access. These squares provide conflict free access to various subsets of an n x n array using n memory modules. A transversal of such a square is a set of n entries such that no two entries share the same row, column or symbol. It will present a general construction method for building parallel Latin square of order n 2for all n. The proposed algorithm presents a quick method to produce a Latin square design. The simulation results of the proposed algorithm for Latin square design were compared with the traditional sequential algorithm Latin square design in terms of speedup and efficiency. The results of Latin Square design were very promising and showed a potential that this design could successfully be applied to the routing problems for conflict free data access.
Keywords: Efficiency, Time to execute, Cost, Latin square, Permutation.
Keywords: Efficiency, Time to execute, Cost, Latin square, Permutation.
Abstract
Medical Image Segmentation Based on the SVM & K-NN based Edge Stop Function
A.Joel Dickson, R.J Alice Nineta
DOI: 10.17148/IJIREEICE.2018.656
Abstract: Edge-based active contour models are successful in segmenting images with intensity in homogeneity but it fail when images are poorly defined boundaries. Such as medical images. The conventional Edge stop function (ESF) use only gradient information it fails to stop gradient magnitude to rectify this problem, we formulate a group of ESFs for edge based active contour models to segment the images with poorly defined boundaries. In our proposed work, which includes gradient information and probability scores from a standard classifier. The distance regularized level set, and k-nearest neighbour’s and SVM are used to experimenting the medical images.
Keywords: Index Terms—Edge-based active contour, edge-stop function, gradient information, image segmentation, probability score.
Keywords: Index Terms—Edge-based active contour, edge-stop function, gradient information, image segmentation, probability score.
Abstract
Sensorless model of PMSM based on DTC method with Adaptive System
G.T.Chandra Sekhar, P. Sowmya
DOI: 10.17148/IJIREEICE.2018.657
Abstract: This paper presents a speed sensorless with direct torque control scheme using Space Vector Modulation (DTC-SVM) for Permanent Magnet Synchronous Motor (PMSM) drive based a Model Reference Adaptive System (MRAS) algorithm. The MRAS is utilized to estimate speed and reduced the torque ripple & improves the accurate output. In other hand the use of SVM method reduces the torque ripple while achieving a good dynamic response. Simulation results are presented and shown the effectiveness of the proposed method.
Keywords: PMSM, DTC-SVM, MRAS, Control technology.
Keywords: PMSM, DTC-SVM, MRAS, Control technology.
Abstract
Design, Manufacturing & Testing of Captive Power Plant Using Liquid Coolant Jet
Mr. Rohit C. Chavan, Mr. Tushar B. Ransing, Ms. Tejaswini V. Khot, Prof. Pooja P. Kulkarni
DOI: 10.17148/IJIREEICE.2018.658
Abstract: Captive Hydropower plant is the Low cost way to generate electricity present day. It is the best source of non-conventional energy. India is developing nation with the growth in population and upsurge in the utilization of electricity is tremendously increasing at an upsetting rate. The following paper explains an idea about efficient use of liquid coolant jet to generate electricity using an open loop coolant flow which gives most economical solution for provincial electrification purpose at Cummins PHP plant. This is achieved by allowing the liquid coolant jet to fall on low head open type water turbine coupled to alternator by means of gear pulley mechanism. The generated electrical energy is fed to lighting load. The working principle, functioning, design with calculations and applications along with future scope of captive power plant has been explained in this paper.
Keywords: Nozzle, Turbine, Alternator, Coolant Jet, Gear Pulley.
Keywords: Nozzle, Turbine, Alternator, Coolant Jet, Gear Pulley.
Abstract
Application of Unified Power Flow Controller and Superconducting Magnetic Energy Storage Device for AGC Problem
G.T.Chandra Sekhar, S. Halini, L. Narasinga Rao
DOI: 10.17148/IJIREEICE.2018.659
Abstract: The load variation in the power system is unpredictable which cause the drift in frequency, voltage to change from their nominal value resulting loss of generation and even blackout. So an approach has been undertaken for investigating the automatic generation control considering three equal area power systems at the first instant. In the present work, a proportional derivative controller with derivative filter (PIDF) is proposed and the gain values of the proposed controller are tuned using Differential Evolution (DE) algorithm. The superiority of the proposed controller is demonstrated by comparing the results with Proportional Integral Derivative (PID) controller. In the next step, proposed approach is extended to three unequal area reheat thermal power systems considering nonlinearities like Generation Rate Constraint (GRC) and Governor Dead Band (GDB). Further, Unified Power Flow Controller (UPFC) is placed in the tie-line to improve the dynamic response of the system based on integral time multiplied absolute error (ITAE), settling times and peak over shoot. Furthermore, Superconducting Magnetic Energy Storage (SMES) is incorporated in area-1 for further improvement in responses of the system. From the results, it is clear that the combination of UPFC and SMES provides better results.
Keywords: PIDF, DE, GRC, GDB, PID, UPFC, SMES, ITAE.
Keywords: PIDF, DE, GRC, GDB, PID, UPFC, SMES, ITAE.
Abstract
Electricity Billing Through PLM
Swati Shirsat, Ganesh Khandve, Vaibhav Karche, Bhagyashree Raut
DOI: 10.17148/IJIREEICE.2018.6510
Abstract: This paper manages the execution of power line system in the field of power billing. In the present situation Power Line Communication (PLC) is one of the temperate methods for correspondence of information. Despite the fact that there are new strategies for remote communication Design of Narrowband PLC for Power Distribution System with Automated Billing Generation through GSM Network techniques, basically it is especially tedious to introduce such a system, and furthermore it is exceptionally taken a toll devouring strategy .But the electrical lines which as of now exist and interface each household device in a specific territory is more invaluable as it doesn't require any new establishment or erection for communication channels, and thus is not a time consuming one . One greatest favorable position of this system is that it can be promptly actualized, not at all like the other present day techniques. This system takes out the requirement for utilizing EB meter reader and this arrangement of representatives can be utilized somewhere else. The long lines in the charging counter can be maintained a strategic distance from by executing this model. Additionally the control of the system is completely automated by this method. The most essential component in this system is the utilization of advanced meters comprising of microcontrollers and constant clock, therefore disposing of the loss of meter information during power failure.
Keywords: Energy meter, Arduino UNO, Power Meter.
Keywords: Energy meter, Arduino UNO, Power Meter.
Abstract
A study on Lane Departure Warning System and Object Detection on Roads for Forward Collision Avoidance
Faiz Habeeb. K, N Kunan, N Tuturaja
DOI: 10.17148/IJIREEICE.2018.6511
Abstract: There are thousands of car accidents in the every year across the world. These accidents claim many lives and lots of properties. There are many different types of accidents, including rear end collisions, side swipes, head on collisions, collisions with stationary objects, accidents while changing lanes, and driving off the road. Seat belt usage, air bags, cruise control, rumble strips, and stricter vehicle safety requirements have all helped to reduce the number of accidents and fatalities. However, it is now possible to do more, by using intelligent driver assistant systems. In this paper, we propose a design lane departure warning system with object classification on road so that the driver can take smart and corrective measures to avoid the deviation from the lane as well as to avoid collision with the vehicle ahead of it. This safety system of Advanced Driver’s Assistance System (ADAS) can help in checking the road accidents. The system highly relies on the Open CV for lane line detection as Lane Departure Warning system (LDWS). The second part of the paper is object detection at the front of the vehicle for collision avoidance. It uses stereo camera as vision sensor. The real image obtained from vision system gives more accurate information to detect the target vehicle and gives satisfactory result. The output from the stereo vision sensor is fed to the controlling unit. Yolo (You Only Look Once) based real time object detection is used to determine the presence of the vehicles in the frame. Depth map for the vehicles located in the vision frame is obtained with help of stereo camera System Development Kit (SDK).
Keywords: LDWS, ADAS, Collision Avoidance, YOLO, SDK.
Keywords: LDWS, ADAS, Collision Avoidance, YOLO, SDK.
Abstract
Design Study and Performance Evaluation of 198kWP Grid Connected SPV System at Academic Block I, Integral University, Lucknow
Eram Kayanat, T.Usmani, Zohaib Hasan Khan
DOI: 10.17148/IJIREEICE.2018.6512
Abstract: In this paper the performance study of 198kWP grid connected SPV System installed at Academic Block I, Integral University, Lucknow has been done with help of software tool PV*SOL. PV*SOL is software design tool for simulating photovoltaic system performance. These systems are designed to work with grid. Solar array and grid, both are connected to the AC Distribution Box (ACDB) through system controller and inverter. This type of system is installed at Integral University Lucknow which is the scope of this study. The simulation results of existing system as well as optimized system are compared to study the performance of a Academic Block I, Integral University, Lucknow.
Keywords: Grid connected SPV system, Tilt Angle, Production Forecast, Renewable Power.
Keywords: Grid connected SPV system, Tilt Angle, Production Forecast, Renewable Power.
Abstract
Automation of Injector Test Stand Machine
Mr. Dnyaneshwar V. Kshirsagar, Mr. Akshay V. Mandhare, Mr. Amar A. Patil, Prof. P.P. Kulkarni
DOI: 10.17148/IJIREEICE.2018.6513
Abstract: This paper explains the control of injector test stand machine. The injector test machine is used to test the injectors in the industry as per requirements. HA290 Harritadge injector test stand was designed for Cummins india Ltd. to test the output of Cummins made injector.This injector test machine is currently controlled by an electronic card and relay system .Since this machine is 36 years old it’s service is not available for electronic parts, hence it’s maintenance is very difficult also it is very difficult to replace all electronic card with new electronic card. We can replace the electronic card with PLC technology. One can make better use of PLC in the design of Injector Test Stand Machine. This control is based on the input that is received from the operator as well as from the sensors. PLC control system is requiring to control all the functions of the injector test stand machine. The ladder logic programming will be used to simulate the proposed system. Because of use of PLC, systems are getting better, faster, Operator can read the measurements of injector accurately.PLC kit will be used to check parameters which affect injector output. Hence it is decided to design PLC operated injector test stand machine.
Keywords: PLC, solenoid valve, injector, proximity sensor, LVDT, motor.
Keywords: PLC, solenoid valve, injector, proximity sensor, LVDT, motor.
Abstract
Power System Fault Analysis Using Signal Processing Technique – A Review
Vaibhav S.Yendole, Prof.Kiran A.Dongre
DOI: 10.17148/IJIREEICE.2018.6514
Abstract: The power quality is a very important issue in electrical power system. Electrical transmission lines are one of the vital components of this power system which play important role in power quality during electricity transmission. These transmission lines are exposed to faults most of time due to atmospheric conditions as well as due to overload. Various methods are established for fault analysis occurs on transmission lines. The study of these methods is necessary for performance improvement as well as to maintain the reliability and stability of the power system in any critical event. This paper presents a review on the signal processing tools used to analyze the behavior of a power system and evaluate the performance of the system for different scenarios
Keywords: Power system, Fault analysis, S-transform, Fourier, MRA, MMG, MUDW, wavelet.
Keywords: Power system, Fault analysis, S-transform, Fourier, MRA, MMG, MUDW, wavelet.