International Journal of Innovative Research in                 Electrical, Electronics, Instrumentation and Control Engineering

A monthly peer-reviewed online and print journal

ISSN Online 2321-2004
ISSN Print 2321-5526

Since  2013

Abstract: LabVIEW based active vibration control by using piezoelectric type resonant sensor is used to suppress the vibration produced in a mechanical system to make more stable vibrations produced by the system should to be controlled. In this paper the characteristics of a resonance control system is based on maintaining the proper frequency, the controller that is realized as a virtual instrument and programmed in the LabVIEW environment, data acquisition and control is implemented by using myRIO. The simulation results in active control vibrating beam using PID controller. The proposed control technique achieves good vibration suppression and it can be tuned to satisfy the requirement.

Keywords: LabVIEW, myRIO, Piezoelectric Sensor


PDF | DOI: 10.17148/IJIREEICE.2019.8308

Open chat