Abstract: Now a day, it became very difficult to know that an accident has occurred and to locate the position where it has happened .There is no system of identification and intimation regarding an accident in previous. Later on the SMS service begins for intimation and purpose. GPS and GSMmake the usage for intimation and identification of place. When an accident occurs the information only be sent through GSM but there is no possibility to locate the spot. This projectpresents a GPS and GSM based accident identification and information system using GPS and GSM-SMS services. So the main intention of the project is to find the accident spot at any place and intimating it to ambulance through GPS and GSM networks. The GPS based vehicle identification module contains vibrating sensor GSM module and a GPS modem connected to the microcontroller. Thereceiver section consists of a GSM receiver. The transmitter section consists of a microcontroller, GPS module, GSM transmitter and vibration sensor. This project implies a system which is a solution to this drawback, when a vehicle meets with an accident immediately a Vibration sensor will detect the signal, and sends it to the Arduino microcontroller. Microcontroller will send an alert message through the GSM modem includingthe location to the police station or a rescue team. So the police can immediately trace the location through the GPS modem after receiving the information. The proposed systems have been simulated and practically design by the use of hardware components and the results are satisfied with the expectation.

| DOI: 10.17148/IJIREEICE.2022.10510