πŸ“ž +91-7667918914 | βœ‰οΈ ijireeice@gmail.com
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering A monthly Peer-reviewed & Refereed journal
ISSN Online 2321-2004ISSN Print 2321-5526Since 2013
IJIREEICE meets the suggestive parameters outlined in the latest University Grants Commission (UGC) for peer-reviewed journals, ensuring high standards of research integrity, publication ethics, and academic excellence.
← Back to VOLUME 14, ISSUE 11, NOVEMBER 2026

DESIGN AND ANALYSIS OF ROLL CAGE OF AN ALL-TERRAIN VEHICLE (ATV)

Kandala Vinay and Mr. Ch. Narayana Murthy

πŸ‘ 10 viewsπŸ“₯ 2 downloads
Share: 𝕏 f in ✈ βœ‰
Abstract: The roll cage serves as the primary structural shell and driver safety framework for All-Terrain Vehicles (ATVs), engineered to withstand high-speed off-road collisions and severe rollover events. This study presents a comprehensive structural design, material selection framework, and Finite Element Analysis (FEA) of an ATV roll cage compliant with SAE BAJA design specifications. Three candidate structural steelsβ€”AISI 1020, AISI 1018, and AISI 4130 Chromolyβ€”were systematically evaluated based on yield strength, strength-to-weight ratio, bending stiffness, weldability, and fabrication viability. AISI 4130 was selected due to its high yield strength (460 MPa) and superior energy absorption characteristics. A 3D CAD framework was modeled using SolidWorks weldment features, followed by static structural impact simulations in ANSYS Workbench under multi-directional loading conditions: Front (8g force / 7503 N), Rear (6g force / 7503 N), Side (4g force / 5625 N), and Rollover (3450.59 N). Finite Element Analysis yielded minimum factors of safety of 1.826 for front impact, 1.0411 for rear impact, 1.0827 for side impact, and 1.538 for rollover impact, with maximum von-Mises stresses remaining safely below the yield strength threshold. The results demonstrate an optimal integration of driver ergonomics, structural rigidity, dynamic impact resistance, and mass efficiency.

Keywords: All-Terrain Vehicle (ATV), Roll Cage Design, Finite Element Analysis (FEA), AISI 4130 Chromoly, Impact Analysis, Factor of Safety (FOS), Structural Integrity.

How to Cite:

[1] Kandala Vinay and Mr. Ch. Narayana Murthy, β€œDESIGN AND ANALYSIS OF ROLL CAGE OF AN ALL-TERRAIN VEHICLE (ATV),” International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), DOI: 10.17148/IJIREEICE.2026.141102

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License.