International Journal of Innovative Research in                 Electrical, Electronics, Instrumentation and Control Engineering

A monthly Peer-reviewed / Refereed journal

ISSN Online 2321-2004
ISSN Print 2321-5526

Since 2013

Abstract: When a short-circuit occurs in a power system, the magnitude of the fault currents, which is very high compared to the steady state current that flows in the power system, is determined by the reactance of the power system equipment (and the reactance of the ground if ground is involved). It is essential that symmetrical and unsymmetrical analysis of the power system network be undertaken to determine the magnitude of these fault currents and fault MVA(Megavolt-Ampere) so as to select adequate ratings of the power system protective devices –such as circuit breakers, relays and fuses. Otherwise, these protective devices will not operate properly in the event of faults thereby causing considerable damage to life and equipment.symmetrical three phase fault is the most severe kind at the transmission lines, while for faults occurring very close to the generating station or synchronous generator, single line to ground fault is the most severe.

Keywords: symmetrical fault, un symmetrical fault, power system, fault analysis


PDF | DOI: 10.17148/IJIREEICE.2021.9731

Open chat