+91-7667918914 ijireeice@gmail.com

International Journal of Innovative Research in
Electrical, Electronics, Instrumentation and Control Engineering

A monthly Peer-reviewed & Refereed journal

ISSN Online 2321-2004
ISSN Print 2321-5526

Since 2013

DESIGN AND FABRICATION OF PNEUMATIC LIFTING TABLE OPERATED BY HYDRUALIC JACK

SHELKE SAURAV VIKAS, YADAV ABHISHEK ANANDA, WAYKAR RAHUL ASHOK, KAMTHE SUPRIYA SUNIL, PROF. P.V JATTI

Abstract: This project was created to allow people to lift any weight with the use of air pressure. A tank is used to hold high-pressure air. A zig-zag pattern connects a cylinder with piston arrangement. The air tank and the cylinder are linked by two pipelines with ball valves. The air rushes out of the cylinder when one of the valves is opened. As a result, the piston travels in a single direction. The piston-connected rod pulls the zig-zag frame up, causing the lift to rise. The air inside the cylinder is released when the other ball valve is opened. As a result, the lift descends.


Downloads: PDF | DOI: 10.17148/IJIREEICE.2022.10488

Cite This:

[1] SHELKE SAURAV VIKAS, YADAV ABHISHEK ANANDA, WAYKAR RAHUL ASHOK, KAMTHE SUPRIYA SUNIL, PROF. P.V JATTI, "DESIGN AND FABRICATION OF PNEUMATIC LIFTING TABLE OPERATED BY HYDRUALIC JACK," International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering (IJIREEICE), DOI 10.17148/IJIREEICE.2022.10488

Open chat